Hard Rock
Mining

MineARC MineSAFE

Emergency refuge forms an integral part of an underground mine’s wider Emergency Response Plan (ERP). Fires, explosions, rock-falls, flooding and the release of smoke and other forms of toxic gas are the types of incidents that occur all too frequently, despite the high levels of planning and the safety precautions in place. In these types of emergencies, when evacuation is no-longer safe or practical, emergency refuge is designed to provide a safe and secure ‘go-to’ area for personnel to gather and await extraction.
 
  
Helping safeguard miners in over 40 countries, across six continents, the MineARC MineSAFE series is the world’s most trusted refuge chamber in metal (hard rock) and non-metal mines.

 

MineSAFE Standard Design Modular Series

 


 

Assembly of a Modular refuge chamber is a simple process that can take place on-site once all sections have been transported underground. Each section features a heavy duty flange arrangement, allowing the chamber to bolt together easily once a seal has been applied. MineARC’s user-friendly electrical system features a plug-and- play connection between each modular section to make a fully functioning refuge chamber.

 

STANDARD FEATURES

  • Aura-FX Fixed Gas Monitoring
  • Modular, Manoeuverable Design for Tight Mining Confines
  • 5mm Steel Plate Construction with Reflective Signage
  • Skid Base with Additional Forklift Slots and Lifting Lugs
  • Blast Rating: 5psi
  • Compressed Air Management System (CAMS)
  • Advanced Series IV Digital Control System with i.V.A.N
  • CO and CO2 Scrubbing (Pre-packaged Chemical Cartridges)
  • Breathable Air (O2) Supply
  • Air Conditioning and Dehumidifying
  • Battery Backup (UPS) – 36hrs Minimum
  • Internal/External Communications and Lighting
  • Viewing Portal and Rear Escape Hatch

OPTIONAL FEATURES

ENQUIRE BROCHURE

 

 

CHAMBER EXTERIOR – FRONT

Lifting Lugs

On roof of chamber.

Siren

112 dBA motion activated siren to allow for easy location of the refuge chamber in an emergency.

Strobe Lighting

Extra low voltage green and red LED lighting to allow for easy identification of the refuge chamber in an emergency.

Heavy Duty Flange Arrangement

On all modular sections for simple connection.

Reflective Signage

Safety and operational signage in reflective stickering for high visibility underground. Translation into a second language available.

Paint

High durability white paint for underground visibility. Sand blasted to 2.5 grit, and in compliance with AS/NZS 2312:2002.

Skid Base

The skid base provides ease of mavoeuvrability, featuring 250 x 100mm forklift slots, front and rear mounted tow points and front mounted 25mm steel plate push blocks.

Sealing Door

Outward opening door, featuring double locking rotating handles. The vacuum tested seal maintains a positive internal pressure.

Porthole Window

12mm porthole viewing window, compliant with Australian Standard 2208. Blast shield protection available upon request.

 

 

CHAMBER INTERIOR

Lighting

8watt fluorescent interior lighting is featured within the chamber.

Air Conditioning

Air conditioning is vital to combat the potentially fatal effects of heat stress, caused by the occupant’s metabolic activity, as well as any ambient heat .

Operating Procedures

Operating procedures are located on the wall of the refuge chamber, as well as within hardcopy manuals. Operating procedures can be translated into a second language.

Oxygen Supply #1: Mine Air

The MineARC Compressed Air Management System (CAMS) is a dedicated air management unit designed specifically for MineARC Refuge Chambers. Click for more information.

MARCISORB Chemical Cartridges

MineARC’s MARCISORB CO2 and MARCISORB CO cartridges provide superior scrubbing capacity, are easy to load, safe to handle, and can store for long periods.

Flooring

Non slip, removable flooring is featured throughout the refuge chamber.

Storage

Ample storage room located under seating and within Series IV Scrubber cabinet.

Oxygen Supply #3: Oxygen Candle

The military approved Oxygen candle provides 2,600L of breathable air during 60 minutes of ignition. Candle is an optional feature for most countries, and must be shipped separately.

Oxygen Supply #2: Medical Grade Oxygen Cylinders

Minimum capacity based on G Size cylinder (8,580L). Medical grade oxygen cylinders to be provided by end user.

Seating

MineARC seating is ergonomically designed to provide suitable comfort during entrapment. Made from durable, hard wearing fabric, the seating provides 500mm of space per person.

Series IV Controller Interface

The digital controller interface is the operational hub of the refuge chamber. From here, all power, lighting & scrubbing systems can be managed with the push of a button. Click for more information.

Series IV Scrubber System

The MineSAFE Standard Design uses active chemicals and MineARC's patented Series IV scrubbing system to ‘scrub’ the build up of harmful CO2 and CO from the chamber.

Heavy Duty Flange Arrangement

On all modular sections for simple connection.

Aura-FX Digital Gas Monitor

• Real-time gas monitoring with live analysis and voice prompting
• Monitor up to 11 gases at any one time

 

 

CHAMBER EXTERIOR – REAR

Communications Box

Communications box for internal communications port via wall mounted 'J' box. External antenna is fitted to front of chamber.

Air Conditioning Condenser

Air conditioning is vital to combat the potentially fatal effects of heat stress, caused by the occupant’s metabolic activity, as well as any ambient heat .

CAMS

The MineARC Compressed Air Management System (CAMS) is a dedicated air management unit designed specifically for MineARC Refuge Chambers. Click for more information.

Battery UPS

36 hour emergency backup power supply, with further options available for up to 96 hours (POA).

 

ENQUIRE BROCHURE

 


  • MineSAFE Standard Design

    MineARC MineSAFE Standard Design

    In consultation with the world’s leading mining companies and regional mining authorities, the MineARC MineSAFE has been continuously re-engineered and refined to create a safe-refuge solution that is fully integrated with today’s modern underground mining environment.
     
    Now in its fourth series, the MineSAFE Standard Design (SD) Refuge Chamber provides miners with optimum safety features, functionality and performance.
     
    Standard configurations are available based on occupancy – from 8 to 30 people – with each model engineered for maximum durability and manoeuvrability, both above and below ground. – More information

  • MineSAFE Essential Design

    The MineSAFE Essential Design (ED) provides the most cost effective alternative to MineARC’s flagship Standard Design refuge chamber. The ED chamber offers all of the critical features required to sustain life during an emergency whilst maintaining the quality of a MineARC engineered
    refuge chamber.
     
    The Essential Design is designed specifically to accommodate tight mining confines such as shaft mines, while still providing ample internal space for a range of occupancies – from 8 to 26 people. The chamber’s narrow design makes it easy to manoeuvre and position around site. – More information

  • MineSAFE Narrow Design

    The MineSAFE Narrow Design (ND) features a slimmer shell, designed specifically to accommodate tight hard rock mining confines such as shaft mines, while still providing ample internal space for a range of occupancies – from 8 to 26 people.
     
    The chamber’s portable design makes it easy to manoeuvre and position around site. – More information

  • MineSAFE Compact Design

    The MineSAFE Compact Design (CD) is designed specifically for tight mining confines, such as single-entry development headings. This small, compact, ultra-portable refuge chamber is easy to manoeuvre and position around site.
     
    The Compact Design is designed for optimum autonomy. The chamber’s ‘extra-low-voltage’ control system means it can sit stand-alone for extended periods without requiring connection to mains (mine) power (around 6 weeks). – More information

  • MineSAFE Permanent Shelter

     
     
    A permanent refuge chamber (as opposed to portable) can often prove to be a more efficient and cost effective solution for an underground mine. In particular, mines that;
             
    • Have a large number of personnel underground at any one time,
    • Have low excavation costs, and
    • Where the regular movement of personnel underground remains within certain areas.
             
    Permanent refuge chambers therefore often double as break, rest and lunch areas, capable of sheltering upwards of hundreds of personnel at any one time. – More information

  • MineSAFE Training Chambers

    MineARC has developed a series of specially designed training chambers, designed to assist sites in the training and development of staff.
     
    The training chambers are available in three configurations – Standard Design with Series IV Scrubber, Standard Design with Series III Scrubber and Compact Design with ELVP Scrubber. They have been engineered to allow for convenient service, maintenance and operational training in an above-ground environment. – More information